Home

1000mL 24/40 Vertical Three Neck Flask
In Stock
Three-Neck

1000mL 24/40 Vertical Three Neck Flask

303428
$97.20
Three-neck round bottom flask with standard taper outer joints of 24/40 on both the center neck and vertical side necks. Heavy wall design increases mechanical strength.
14/20 Vacuum/Gas Adapter
In Stock
Hose Connect

14/20 Vacuum/Gas Adapter

123001
$17.20
With 8mm hose connection on top and 14/20 standard taper inner joint at bottom.
24/40 Vacuum/Gas Adapter
In Stock
Hose Connect

24/40 Vacuum/Gas Adapter

123002
$21.20
With 10mm hose connection on top and 24/40 standard taper inner joint at bottom.
Fritted 14/20 Inlet Adapter
In Stock
Hose Connect

Fritted 14/20 Inlet Adapter

127661
$20.80
With hose connection on top, 14/20 standard taper joint at bottom, fritted disc (coarse) prevents the solid contamination to the reaction system.
Fritted 24/40 Inlet Adapter
In Stock
Hose Connect

Fritted 24/40 Inlet Adapter

127952
$25.50
With hose connection on top, 24/40 standard taper joint at bottom, fritted disc (coarse) prevents the solid contamination to the reaction system.
14/20 Vigreux Distilling Column, 120 mm
In Stock
Distillation

14/20 Vigreux Distilling Column, 120 mm

631214
$56.40
Vigreux distilling column is designed for fractional distillation of compounds with different boiling point. 14/20 upper and lower standard taper joints, indentation length: 120 mm.
14/20 Inlet Thermometer Adapter
In Stock
STD Joint Connect

14/20 Inlet Thermometer Adapter

153701
$22.60
Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
24/40 Vigreux Distilling Column, 200 mm
In Stock
Distillation

24/40 Vigreux Distilling Column, 200 mm

632024
$63.80
Vigreux distilling column is designed for fractional distillation of compounds with different boiling point. 24/40 upper and lower standard taper joints, indentation length: 200 mm.
14/20 With Hose Connection Inlet Thermometer Adapter
In Stock
Hose Connect

14/20 With Hose Connection Inlet Thermometer Adapter

154721
$30.60
With a 8mm O.D. hose connection for vacuum or for the introduction of gases. Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
Product added to compare.