Home

Showing 1-12 of 27 item(s)

In Stock

STD Joint Connect

14/20 Inlet Thermometer Adapter

153701

$22.60

Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.

In Stock

Distillation

24/40 Vertical Vacuum Distillation Adapter

133212

$43.20

With a sealed in drip tip, and a side hose connection for vacuum or for the introduction of gases.

In Stock

Distillation

14/20 10 mL Dean Stark Distillation Apparatus

620114

$132.00

To separate water from the reaction by distillation, with 14/20 standard taper inner joint. Graduated 10 mL receiver, with 2mm Teflon stopcock for easy measurement and removal of generated water.

In Stock

Distillation

24/40 Distillation Receiver Funnel for Oil Water Separation, 250 mL, Teflon Stopcock

506250

$88.20

Distillation receiver for oil water separation with 24/40 outer joint, 250 mL capacity, supplied with #4 Teflon stopcock. It is ideal for essential oil distillation .

In Stock

Distillation

24/40 20 mL Dean Stark Distillation Apparatus

620224

$146.00

To separate water from the reaction by distillation, with 24/40 standard taper inner joint. Graduated 20 mL receiver, with 2mm Teflon stopcock for easy measurement and removal of generated water.

In Stock

Hose Connect

14/20 With Hose Connection Inlet Thermometer Adapter

154721

$30.60

With a 8mm O.D. hose connection for vacuum or for the introduction of gases. Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.

In Stock

Hose Connect

24/40 With Hose Connection Inlet Thermometer Adapter

154722

$33.20

With a 10mm O.D. hose connection for vacuum or for the introduction of gases. Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.

In Stock

Multi-Neck

500mL 24/40 Vertical Four Neck Flask

304227

$117.40

Four-neck round bottom flask with standard taper outer joints of 24/40 on all four necks. Heavy wall design increases mechanical strength.

1000mL side 24/40 center 29/42 Vertical Four Neck Flask

In Stock

Multi-Neck

1000mL side 24/40 center 29/42 Vertical Four Neck Flask

304328

$160.60

Four-neck round bottom flask with standard taper outer joints of 29/42 on the center neck and 24/40 on all three side necks. Heavy wall design increases mechanical strength.

500mL 24/40 3-Neck with Bottom Outlet Round Bottom Flask

In Stock

Three-Neck

500mL 24/40 3-Neck with Bottom Outlet Round Bottom Flask

323227

$189.60

Three-neck round bottom flask with standard taper outer joints of 24/40 on all three neck. Heavy wall design. Lower outlet equipped with 4mm Teflon straight bore stopcock.

1000mL side 24/40 center 29/42 3-Neck with Bottom...

In Stock

Three-Neck

1000mL side 24/40 center 29/42 3-Neck with Bottom Outlet Round Bottom Flask

323237

$206.60

Three-neck round bottom flask with standard taper outer joints of 29/42 on the center neck,and 24/40 on side necks. Heavy wall design. Lower outlet equipped with 4mm Teflon straight bore stopcock.

500mL 24/40 With Threaded Side Arm Round Bottom 3-Neck...

In Stock

Multi-Neck

500mL 24/40 With Threaded Side Arm Round Bottom 3-Neck Flask

334227

$119.60

Three-neck round bottom flask with standard taper outer joints of 24/40 on all three necks. Flask comes with threaded side arm for insertion of thermometers having OD of 4~7mm. Heavy wall design increases mechanical strength.