• -30%
24/40 Jacketed Short Path Distillation Apparatus

24/40 Jacketed Short Path Distillation Apparatus

618024
Out-of-Stock
$217.00 $310.00 -30%

24/40 standard joint short-path distilling head, used with 50mm immersion thermometer with 10/18 standard taper joint. One-piece and compact design for easy and efficient use . The short condensate path is dedicated for the purification of small amount yet precious synthetic product.

 

Customers who bought this product also bought:

24/40 75 degree Bent Adapter
In Stock
Distillation

24/40 75 degree Bent Adapter

106272
$32.30
With 24/40 standard taper inner joint at both ends at 75 degree to one another.
1000mL 24/40 Angled Three Neck Flask
  • -$10.00
In Stock
24/40 Hollow Glass Penny-Head Stopper
  • -50%
In Stock
24/40 Standard Taper Joint Clip (1pc)
  • On sale!
  • -$3.00
In Stock

Customers who bought this product also bought:

24/40 Transfer Adapter with High Vacuum Valve
In Stock
STD Joint Connect

24/40 Transfer Adapter with High Vacuum Valve

155924
$109.80
Adapter has a 0-4mm high vacuum PTFE valve between the top 24/40 outer and the lower 24/40 inner joints. The PTFE valve has metering tip to adjust the liquid transfer flow, and the O-rings are completely enclosed with thin layer of PTFE around the valve. This new design makes it inert to most chemical/solvents being transferred from one vessel to the other.
24/40 Inlet Thermometer Adapter
In Stock
STD Joint Connect

24/40 Inlet Thermometer Adapter

153702
$26.40
Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
500mL 24/40 Angled Two Neck Flask
In Stock
Two-Neck

500mL 24/40 Angled Two Neck Flask

302027
$64.70
Two-neck round bottom flask with standard taper outer joints of 24/40 on both the center neck and angled side neck. Heavy wall design increases mechanical strength.
1000mL 24/40 Angled Three Neck Flask
  • -$10.00
In Stock
Three-Neck

1000mL 24/40 Angled Three Neck Flask

303028
$86.40 $96.40
Three-neck round bottom flask with standard taper outer joints of 24/40 on both the center neck and angled side necks. Heavy wall design increases mechanical strength.
24/40 75 degree Bent Adapter
In Stock
Distillation

24/40 75 degree Bent Adapter

106272
$32.30
With 24/40 standard taper inner joint at both ends at 75 degree to one another.
24/40 Vacuum Transfer Adapter
In Stock
Hose Connect

24/40 Vacuum Transfer Adapter

122202
$121.80
Used to transfer sensitive and hazardous reagents. With 2mm bore Teflon stopcock.
Product added to compare.