Home

14/20 Inlet Thermometer Adapter
In Stock
STD Joint Connect

14/20 Inlet Thermometer Adapter

153701
$22.60
Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
24/40 Inlet Thermometer Adapter
Out-of-Stock
STD Joint Connect

24/40 Inlet Thermometer Adapter

153702
$26.40
Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
14/20 With Hose Connection Inlet Thermometer Adapter
In Stock
With a 8mm O.D. hose connection for vacuum or for the introduction of gases. Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
25 mm Nylon Membrane, 0.45 um Pore Size, Nonsterile...
  • -50%
In Stock
PrecisionTM premium syringe filter, Nylon membrane, 25 mm diameter, 0.45 um pore size, nonsterile. Suitable for aqueous solutions (pH 6~13) and most organic solutions. Ideal for the efficient filtration of samples up to 100 mL. Precision filters are produced from pigment-free polypropylene housing with standard inlet (female luer lock) and outlet (male...
24/40 With Hose Connection Inlet Thermometer Adapter
In Stock
With a 10mm O.D. hose connection for vacuum or for the introduction of gases. Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
25 mm Nylon Membrane, 0.2 um Pore Size, Nonsterile...
  • -50%
Out-of-Stock
PrecisionTM premium syringe filter, Nylon membrane, 25 mm diameter, 0.2 um pore size, nonsterile. Suitable for aqueous solutions (pH 6~13) and most organic solutions. Ideal for the efficient filtration of samples up to 100 mL. Precision filters are produced from pigment-free polypropylene housing with standard inlet (female luer lock) and outlet (male...
500mL  24/40  Vertical  Four Neck Flask
In Stock
$117.40
Four-neck round bottom flask with standard taper outer joints of 24/40 on all four necks. Heavy wall design increases mechanical strength.
25 mm PES Membrane, 0.45 um Pore Size, Nonsterile Syringe...
  • -50%
In Stock
PrecisionTM premium syringe filter, Polyethersulfone (PES) membrane, 25 mm diameter, 0.45 um pore size, nonsterile. Suitable for aqueous solutions (pH 1~14) and some mild organic solutions. With low protein binding it is ideal for the efficient filtration of biological samples up to 100 mL. Precision filters are produced from pigment-free polypropylene...
25 mm Polypropylene Membrane, 0.45 um Pore Size,...
  • -50%
In Stock
PrecisionTM premium syringe filter, Polypropylene membrane, 25 mm diameter, 0.45 um pore size, nonsterile. Suitable for aqueous solution and most organic solutions. Ideal for the efficient filtration of samples up to 100 mL. Precision filters are produced from pigment-free polypropylene housing with standard inlet (female luer lock) and outlet (male luer)...
25 mm PTFE Membrane, 0.45 um Pore Size, Nonsterile...
  • -50%
In Stock
PrecisionTM premium syringe filter, PTPF membrane, 25 mm diameter, 0.45 um pore size, nonsterile. Excellent chemical resistance, suitable for most aggressive solvent, acid and base samples. Ideal for the efficient filtration of samples up to 100 mL. Precision filters are produced from pigment-free polypropylene housing with standard inlet (female luer...
25 mm PTFE Membrane, 0.2 um Pore Size, Nonsterile Syringe...
  • -50%
In Stock
PrecisionTM premium syringe filter, PTPF membrane, 25 mm diameter, 0.2 um pore size, nonsterile. Excellent chemical resistance, suitable for most aggressive solvent, acid and base samples. Ideal for the efficient filtration of samples up to 100 mL. Precision filters are produced from pigment-free polypropylene housing with standard inlet (female luer...
13 mm PTFE Membrane, 0.45 um Pore Size, Nonsterile...
  • -50%
Out-of-Stock
PrecisionTM premium syringe filter, PTPF membrane, 13 mm diameter, 0.45 um pore size, nonsterile. Excellent chemical resistance, suitable for most aggressive solvent, acid and base samples. Ideal for the efficient filtration of samples up to 10 mL. Precision filters are produced from pigment-free polypropylene housing with standard inlet (female luer...
500mL  24/40  With Threaded Side Arm  Round Bottom 3-Neck...
In Stock
Three-neck round bottom flask with standard taper outer joints of 24/40 on all three necks. Flask comes with threaded side arm for insertion of thermometers having OD of 4~7mm. Heavy wall design increases mechanical strength.
25 mm PVDF Membrane, 0.45 um Pore Size, Nonsterile Syringe Filters, Pack of 100
  • -50%
Out-of-Stock
PrecisionTM premium syringe filter, PVDF membrane, 25 mm diameter, 0.45 um pore size, nonsterile. Good solvent resistance, suitable for aqueous solutions and many organic solutions. With low nonspecific binding it is ideal for efficient filtration of general biological samples up to 100 mL. Precision filters are produced from pigment-free polypropylene...
1000mL  24/40  29/42  With Threaded Side Arm  Round...
In Stock
Three-neck round bottom flask with standard taper outer joints of 29/42 on the center neck and 24/40 on other two side necks. Flask comes with threaded side arm for insertion of thermometers having OD of 4~7mm. Heavy wall design increases mechanical strength.
100mL  14/20  High Vacuum Valve  Reaction Flask
In Stock
$88.20
Round bottom reaction flask with a standard taper outer joint. PTFE high vacuum valve has valve size of 0-4mm. The O-rings are protected by precisely engineered Teflon wipers, which ensures perfect seal and excellent chemical resistance.
250mL  24/40  High Vacuum Valve  Reaction Flask
In Stock
$99.40
Round bottom reaction flask with a standard taper outer joint. PTFE high vacuum valve has valve size of 0-4mm. The O-rings are protected by precisely engineered Teflon? wipers, which ensures perfect seal and excellent chemical resistance.
500mL  24/40  High Vacuum Valve  Reaction Flask
In Stock
$107.60
Round bottom reaction flask with a standard taper outer joint. PTFE high vacuum valve has valve size of 0-4mm. The O-rings are protected by precisely engineered Teflon wipers, which ensures perfect seal and excellent chemical resistance.
15 mL Pressure Vessel with 15 mm Teflon Bushing and Viton...
In Stock
Heavy wall pressure tube have internal threads for the use with 15 mm Teflon busing (included) and #013 O-ring (included). With the capacity of 15 mL, OD of 26 mm and length of 109 mm, this pressure vessel is useful for sealed reactions, e.g. polymerization, C-C coupling reactions. Reminder: Always work behind a safety shield when running pressurized...
35 mL Pressure Vessel with 15 mm Teflon Bushing and Viton...
In Stock
Heavy wall pressure tube have internal threads for the use with 15 mm Teflon busing (included) and #013 O-ring (included). With the capacity of 35 mL, OD of 26 mm and length of 164 mm, this pressure vessel is useful for sealed reactions, e.g. polymerization, C-C coupling reactions. Reminder: Always work behind a safety shield when running pressurized...
75 mL Pressure Vessel with 15 mm Teflon Bushing and Viton...
In Stock
Heavy wall round bottom pressure vessel have internal threads for the use with 15 mm Teflon busing (included) and #013 O-ring (included). With the capacity of 75 mL, OD of 46 mm and length of 129 mm, this pressure vessel is useful for sealed reactions, e.g. polymerization, C-C coupling reactions. Reminder: Always work behind a safety shield when running...
150 mL Pressure Vessel with 15 mm Teflon Bushing and...
In Stock
Heavy wall round bottom pressure vessel have internal threads for the use with 15 mm Teflon busing (included) and #013 O-ring (included). With the capacity of 150 mL, OD of 60 mm and length of 139 mm, this pressure vessel is useful for sealed reactions, e.g. polymerization, C-C coupling reactions. Reminder: Always work behind a safety shield when running...
14/20 Transfer Adapter with High Vacuum Valve
In Stock
$96.20
Adapter has a 0-4mm high vacuum PTFE valve between the top 14/20 outer and the lower 14/20 inner joints. The PTFE valve has metering tip to adjust the liquid transfer flow, and the O-rings are completely enclosed with thin layer of PTFE around the valve. This new design makes it inert to most chemical/solvents being transferred from one vessel to the other.
24/40 Transfer Adapter with High Vacuum Valve
Out-of-Stock
$109.80
Adapter has a 0-4mm high vacuum PTFE valve between the top 24/40 outer and the lower 24/40 inner joints. The PTFE valve has metering tip to adjust the liquid transfer flow, and the O-rings are completely enclosed with thin layer of PTFE around the valve. This new design makes it inert to most chemical/solvents being transferred from one vessel to the other.
29/42 to 24/40 Transfer Adapter with High Vacuum Valve
In Stock
Custom-made transfer adapter has a 0-4mm high vacuum PTFE valve between the top 29/42 outer and the lower 24/40 inner joints. The PTFE valve has metering tip to adjust the liquid transfer flow, and the O-rings are completely enclosed with thin layer of PTFE around the valve. This valve design makes it inert to most chemical/solvents being transferred from...
Product added to compare.