Home

14/20 Vacuum Jacketed Short Path Distillation Apparatus
  • -40%
Out-of-Stock
$156.00 $260.00
Used with 25mm immersion thermometer with 10/18 standard taper joint. Vacuum jacked path increases distillation efficiency. The short condensate path is dedicated for the purification of small amount yet precious synthetic product.
14/20 Inlet Thermometer Adapter
In Stock
STD Joint Connect

14/20 Inlet Thermometer Adapter

153701
$22.60
Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
14/20 10 mL Dean Stark Distillation Apparatus
In Stock
$132.00
To separate water from the reaction by distillation, with 14/20 standard taper inner joint. Graduated 10 mL receiver, with 2mm Teflon stopcock for easy measurement and removal of generated water.
24/40 Inlet Thermometer Adapter
Out-of-Stock
STD Joint Connect

24/40 Inlet Thermometer Adapter

153702
$26.40
Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
24/40 20 mL Dean Stark Distillation Apparatus
In Stock
$146.00
To separate water from the reaction by distillation, with 24/40 standard taper inner joint. Graduated 20 mL receiver, with 2mm Teflon stopcock for easy measurement and removal of generated water.
14/20 With Hose Connection Inlet Thermometer Adapter
In Stock
With a 8mm O.D. hose connection for vacuum or for the introduction of gases. Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
24/40 With Hose Connection Inlet Thermometer Adapter
In Stock
With a 10mm O.D. hose connection for vacuum or for the introduction of gases. Supplied with a compression cap and Viton o-ring for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 5mm-7mm.
500mL  24/40  Vertical  Four Neck Flask
In Stock
$117.40
Four-neck round bottom flask with standard taper outer joints of 24/40 on all four necks. Heavy wall design increases mechanical strength.
500mL  24/40  With Threaded Side Arm  Round Bottom 3-Neck...
In Stock
Three-neck round bottom flask with standard taper outer joints of 24/40 on all three necks. Flask comes with threaded side arm for insertion of thermometers having OD of 4~7mm. Heavy wall design increases mechanical strength.
1000mL  24/40  29/42  With Threaded Side Arm  Round...
In Stock
Three-neck round bottom flask with standard taper outer joints of 29/42 on the center neck and 24/40 on other two side necks. Flask comes with threaded side arm for insertion of thermometers having OD of 4~7mm. Heavy wall design increases mechanical strength.
100mL  14/20  High Vacuum Valve  Reaction Flask
In Stock
$88.20
Round bottom reaction flask with a standard taper outer joint. PTFE high vacuum valve has valve size of 0-4mm. The O-rings are protected by precisely engineered Teflon wipers, which ensures perfect seal and excellent chemical resistance.
250mL  24/40  High Vacuum Valve  Reaction Flask
In Stock
$99.40
Round bottom reaction flask with a standard taper outer joint. PTFE high vacuum valve has valve size of 0-4mm. The O-rings are protected by precisely engineered Teflon? wipers, which ensures perfect seal and excellent chemical resistance.
500mL  24/40  High Vacuum Valve  Reaction Flask
In Stock
$107.60
Round bottom reaction flask with a standard taper outer joint. PTFE high vacuum valve has valve size of 0-4mm. The O-rings are protected by precisely engineered Teflon wipers, which ensures perfect seal and excellent chemical resistance.
15 mL Pressure Vessel with 15 mm Teflon Bushing and Viton...
In Stock
Heavy wall pressure tube have internal threads for the use with 15 mm Teflon busing (included) and #013 O-ring (included). With the capacity of 15 mL, OD of 26 mm and length of 109 mm, this pressure vessel is useful for sealed reactions, e.g. polymerization, C-C coupling reactions. Reminder: Always work behind a safety shield when running pressurized...
35 mL Pressure Vessel with 15 mm Teflon Bushing and Viton...
In Stock
Heavy wall pressure tube have internal threads for the use with 15 mm Teflon busing (included) and #013 O-ring (included). With the capacity of 35 mL, OD of 26 mm and length of 164 mm, this pressure vessel is useful for sealed reactions, e.g. polymerization, C-C coupling reactions. Reminder: Always work behind a safety shield when running pressurized...
75 mL Pressure Vessel with 15 mm Teflon Bushing and Viton...
In Stock
Heavy wall round bottom pressure vessel have internal threads for the use with 15 mm Teflon busing (included) and #013 O-ring (included). With the capacity of 75 mL, OD of 46 mm and length of 129 mm, this pressure vessel is useful for sealed reactions, e.g. polymerization, C-C coupling reactions. Reminder: Always work behind a safety shield when running...
Product added to compare.